Olympic Triceps Bar GOB34
Gympac Olympic Tricep Bars are top of the range and ideal for serious lifters. These bars pack a superior specification, finish and strength rating compared to our standard bars. Suitable for use with 2″ Olympic weight plates and collars. Ultra-durable hard chrome sleeves with black oxide centre Bronze bushings with uprated bearings for a smooth, reliable spin Longer 22cm sleeves allow more weight to be loaded Thicker 28mm knurled grips Branded Gympac end caps Suitable for use with all 2″ Olympic weight plates Recommended for use with Gympac quick release Olympic collars and springs Specification: Bar weight: approx. 15kg (33lbs) Bar length: 95.5cm (3.1ft) Grip diameter: 28mm (1.1″) Sleeve diameter: 50mm (2″) Sleeve length: 22cm (8.7″) Load testing: 700lb
相关产品
Fractional Plates
Fractional plates, also referred to as micro plates or change plates, are used for making small increments in lifts to accumulate small and consistent weight gains.
Available in five different increments from 0.5kg to 2.5kg, these are essential for incrementing load and to help you hit your percentages with accuracy. With smooth raised edges to protect and preserve your quality bumpers and bars, our Fractional Plates fit perfectly with your existing plates.
SPECIFICATIONS
Weight 0.5KG, 1KG, 1.5KG, 2KG, 2.5KG
Material Rubber
Color Various
Olympic Barbell Weightlifting 15kg (Women’s)
The TESIRO Weightlifting competition olympic barbell 15kg is made from a special steel alloy. The bar is built according to the IWF Specifications and comes with lifetime warranty against bending!
It comprises of the Nothing can beat the durability of the classic silver hard chrome finish and the great performance of our bar makes it an ideal choice in your professional setup. It comprises of the TESIRO unique bearing system with 8HK Needle Bearings.
- Strength rating at 200,000 PSI
- Weight - 15 kg
- Grip - 25 mm
- Sleeve diameter - 50mm
- Length - 2.01 meters
- 1.2mm Diamond Knurl
- Single International Weightlifting Knurl Mark
- Good Whip
Olympic Barbell Weightlifting Hummingbird 15kg (Pink Edition)
The TESIRO Hummingbird Barbell 15kg (Pink Edition) is made from a special steel alloy. The TESIRO Hummingbird Barbell has a Cerakote Pink finish on the shaft and Black Finish on the sleeves. Cerakote coating is highly durable and rust resistant. If you live in a coastal area with high humidity, the Cerakote finish is ideal for your use.
It comprises of the TESIRO unique ball bearing system with 8HK Ball Bearings. This bar is our incredible deal for CrossFit boxes, Conventional gyms and Olympic weightlifting gyms.
- Strength rating at 200,000 PSI
- Cerakote Pink Finish
- Weight - 15 kg
- Grip - 25 mm
- Sleeve diameter - 50mm
- Length - 2.01 meters
- 1.2mm Diamond Knurl
- Dual International Weightlifting + Powerlifting mark
- 8 HK Needle Bearings
- Good Whip
Olympic Barbell Weightlifting Red Falcon 20kg (Cerakote)
The TESIRO Red Falcon Weightlifting Olympic Barbell is made from a special steel alloy. The TESIRO Red Falcon Barbell has a Cerakote Red finish on the shaft and Black Finish on the sleeves. Cerakote coating is highly durable and rust resistant. If you live in a coastal area with high humidity, the Cerakote finish is ideal for your use.
Checkout the review of the TESIRO Red Falcon Bar 20Kg here!
It comprises of the TESIRO unique ball bearing system with 10HK Ball Bearings for smooth rotation while lifting. This bar is our incredible deal for CrossFit boxes, Conventional gyms and Olympic weightlifting gyms.
- Strength rating at 200,000 PSI
- Cerakote Red Finish
- Weight - 20 kg
- Grip - 28 mm
- Sleeve diameter - 50mm
- Length - 2.20 meters
- 1.2mm Diamond Knurl
- Dual International Weightlifting + Powerlifting mark
- 10 HK Needle Bearings
- Good Whip
Powerlifting Barbell 20kg (IPF Specifications)
The TESIRO powerlifting barbell is made from special steel alloy. The TESIRO Powerlifting Barbell is made according to IPF Specifications and thus is used in professional powerlifting setups all over the country.
You can read the full review of the TESIRO Powerlifting Barbell 20kg India!
The 1.5mm Volcano Knurl with the IPF knurl mark makes the TESIRO Powerlifting Barbell suitable for all national competitions and training. It comprises of the TESIRO signature bushing system.
- Strength rating at 200,000 PSI
- Weight - 20 kg
- Grip - 28 mm
- Sleeve diameter - 50mm
- Length - 2.20 meters
- 1.5mm Volcano Knurl
- Single International Powerlifting Knurl Mark
- 6 Bronze Bushings
- Medium Whip
TFB02 Color Rubber Bumper Plates
TESIRO PLATES
Made to IWF Olympic standards, our Olympic Bumper Plates are commercial quality. They’re engineered for serious functional fitness use, and have been tested to withstand over 9,000 stops onto hard flooring, making them reliable and durable.
Depending on the weight, the plate thickness changes. However, all plates comply with IWF standards, and have a hole diameter of 2 inches (or 50.8mm).
Coated in high-quality rubber, the plates also feature an embossed TESIRO logo and the plate weight on both sides. These plates are idea for indoor home gyms or garage gyms, as well as competition Olympic lifting, strength training and functional fitness.
Bumper Plate Coating: Color rubber embossed with logo and plate weight.
Bumper Plate Hole Diameter: 2 inches, or 50.8 millimeters – suits Olympic-standard Barbells.
Inner cover: Hibernated stainless steel.
Bumper Plate Size: 450mm length by 450mm height. See below for width.
Bumper Plate Width:
5KG 24MM
10KG 44MM
15KG 64MM
20KG 81MM
25KG 97MM
The Deadlift Bar
Specifically engineered for serious lifters, this deadlift bar is designed to maximise performance by offering superior whip (flex) and an optimised grip. With a 27mm shaft diameter, aggressive knurling, and an extended overall length of 2330mm, this bar allows athletes to pull more efficiently, achieving higher lifts and breaking personal records.
The enhanced whip of the bar lets you initiate the lift from a slightly higher position before the plates leave the floor, reducing initial strain and helping you move heavier loads. Additionally, the reduced shaft diameter dramatically improves grip strength by reducing the circumference by nearly 6mm, giving you a more secure hold and boosting overall performance.
Unlike standard Olympic bars, the slightly wider sleeve spacing is strategically designed to support better whip action during heavy deadlifts. Built for competitive athletes and elite training center's, this specialised deadlift bar is the ultimate choice for those who are serious about maximising their deadlift potential.
Unlike standard Olympic bars, the slightly wider sleeve spacing is strategically designed to support better whip action during heavy deadlifts. Built for competitive athletes and elite training center's, this specialised deadlift bar is the ultimate choice for those who are serious about maximising their deadlift potential.
- Strength rating at 200,000 PSI
- Weight - 20 kg
- Grip - 27 mm
- Sleeve diameter - 50mm
- Length - 2.33 meters
- 1.5mm Volcano Knurl
- Single IPF-4 Knurl Mark
- 6 Bronze Bushings
- Great Whip