Bars & Plates
Olympic Triceps Bar GOB34
The Gympac tricep curl bar with brass bushes is designed to work the muscles from different angles and to reduce the stress that a straight barbell can place on the joints in the arm (the wrists, elbows and forearms) by allowing for a much more ergonomic grip of the bar. Compatible with any Olympic plates, it features a solid nickel plated finish with two brass bushes in each end, giving you a smoother spin with no annoying bolts to fall out. Supplied with spring collars. Specifications: -- Bar Weight: 12kg -- Weight Rating: 700lbs -- Length: 880mm -- Shaft Diameter: 28mm -- Sleeve length: 180mm -- Sleeve diameter: 49.5 – 50.5mm -- Shaft material: Carbon steel -- Shaft coating: Nickel Plate -- Sleeve material: Nickel Plate -- Knurling: Fine, grippy -- 4 brass bushes
Olympic Triceps Bar GOB34
Gympac Olympic Tricep Bars are top of the range and ideal for serious lifters. These bars pack a superior specification, finish and strength rating compared to our standard bars. Suitable for use with 2" Olympic weight plates and collars. Ultra-durable hard chrome sleeves with black oxide centre Bronze bushings with uprated bearings for a smooth, reliable spin Longer 22cm sleeves allow more weight to be loaded Thicker 28mm knurled grips Branded Gympac end caps Suitable for use with all 2" Olympic weight plates Recommended for use with Gympac quick release Olympic collars and springs Specification: Bar weight: approx. 15kg (33lbs) Bar length: 95.5cm (3.1ft) Grip diameter: 28mm (1.1") Sleeve diameter: 50mm (2") Sleeve length: 22cm (8.7") Load testing: 700lb
Olympic Weightlifting Technique Barbell 10kg (Kid’s)
TESIRO technique weightlifting barbell is ideal for beginners. Sturdy Nylon bushings and the bar's design allow sleeves to rotate freely giving the feeling of lifting with an TESIRO Olympic Weightlifting Bar. This enables a smooth transition and appropriate progressions to heavier standard weightlifting bars. Sleeves are made of anodised aluminium.
- Weight - 10 kg
- Grip - 25 mm
- Sleeve diameter - 49.8mm
- Length - 2.20 meters
- 1.0mm Mild Knurl
- Single International Weightlifting Knurl Mark
- 4 Nylon Bushings
- Low Whip
Powerlifting Bar / 2000lb / Hard Chrome OBP20H2
Our new Powerlifting Bar has been designed for the best and so meets IPF specifications. It’s the ideal choice for serious lifters and training spaces where accuracy, performance, and reliability are paramount. This Powerlifting bar has been tested to a tensile strength of 215,000 psi and a yield strength. The bar has been constructed with high loading in mind, with a max capacity of 900kg. Alloy steel construction and hard chrome finish make it an exceptionally good-looking barbell as well as being a top spec piece of equipment on the market. A powerlifting barbell differs from an Olympic weightlifting barbell in that it is more rigid to better accommodate the heavier weights. Our power bar is 1mm thicker than the Olympic weightlifting bar and has slightly different markings on the bar. Power bars do not have needle bearing and instead have brass bushing as they don’t really need for the sleeves to spin so freely as they do on Olympic bars. Specifications: Material: Alloy Steel Bushing: brass bushings x 4 Bar weight：20 KG Diameter：29 mm Length：86″/220 cm Loadable sleeve length：16″/41 cm Knurl：multi and centre knurling Shaft Coating：Hard Chrome Sleeve coating：Hard Chrome Tensile strength：215,000 PSI Max Capacity: 2000 LBS/900 kgs
Powerlifting Bar / 2000lb / Teflon Grip OBP20HB2
Our new Powerlifting Bar has been designed for the best and so meets IPF specifications. It’s the ideal choice for serious lifters and training spaces where accuracy, performance, and reliability are paramount. This Powerlifting bar has been tested to a tensile strength of 215,000 psi and a yield strength. The bar has been constructed with high loading in mind, with a max capacity of 900kg. Alloy steel construction and hard chrome finish sleeve and Teflon Shaft make it an exceptionally good-looking barbell as well as being a top spec piece of equipment on the market. A powerlifting barbell differs from an Olympic weightlifting barbell in that it is more rigid to better accommodate the heavier weights. Our power bar is 1mm thicker than the Olympic weightlifting bar and has slightly different markings on the bar. Power bars do not have needle bearing and instead have brass bushing as they don’t really need for the sleeves to spin so freely as they do on Olympic bars. Specifications: Material: Alloy Steel Bushing: brass bushings x 4 Bar weight：20 KG Diameter：29 mm Length：86″/220 cm Loadable sleeve length：16″/41 cm Knurl：Multi and centre knurling Shaft Coating：Teflon Coating Sleeve coating：Hard Chrome Tensile strength：215,000 PSI Max Capacity: 2000 LBS/900 kgs
Powerlifting Barbell 20kg Stainless Steel (IPF Specifications)
Unleash more power in your lifts with the TESIRO Powerlifting Bar – Stainless Steel Edition, engineered for peak performance in deadlifts, squats, and bench presses. With an aggressive knurl and unmatched grip feel, this bar delivers the raw, tactile experience lifters crave—without the hassle of maintenance.
Key Benefits of the Stainless Steel Construction:
Rust-Free Performance: The stainless steel shaft and sleeves offer top-tier corrosion resistance, eliminating the need for frequent maintenance.
Exceptional Grip Feel: Experience a near bare-steel feel with aggressive knurling for enhanced control during heavy lifts.
High Stiffness: With a 205,000 PSI tensile strength, this bar provides the rigidity needed for serious powerlifting movements.
The 1.5mm Volcano Knurl with the IPF knurl mark makes the TESIRO Stainless Steel Powerlifting Barbell suitable for all national competitions and training. It comprises of the TESIRO signature bushing system.
- Strength rating at 205,000 PSI
- Weight - 20 kg
- Grip - 29 mm
- Sleeve diameter - 50mm
- Length - 2.20 meters
- 1.5mm Volcano Knurl
- Single IPF-5 Knurl Mark
- 6 Bronze Bushings
- No Whip
Powerlifting Barbell 20kg (IPF Specifications)
The TESIRO powerlifting barbell is made from special steel alloy. The TESIRO Powerlifting Barbell is made according to IPF Specifications and thus is used in professional powerlifting setups all over the country.
You can read the full review of the TESIRO Powerlifting Barbell 20kg India!
The 1.5mm Volcano Knurl with the IPF knurl mark makes the TESIRO Powerlifting Barbell suitable for all national competitions and training. It comprises of the TESIRO signature bushing system.
- Strength rating at 200,000 PSI
- Weight - 20 kg
- Grip - 28 mm
- Sleeve diameter - 50mm
- Length - 2.20 meters
- 1.5mm Volcano Knurl
- Single International Powerlifting Knurl Mark
- 6 Bronze Bushings
- Medium Whip
Powerlifting Barbell Hercules Bar 20kg
After being demanded for our valuable customers for quite some time, we finally have a barbell which will help you reach your 1RM's! The TESIRO Hercules Barbell has a 1.5MM Volcano knurl which is aggressive, adequate stiffness and the 29mm shaft diameter is optimal for your heaviest lifts!
The shaft is Red Cerakote finish with aggressive 1.5MM Volcano Knurl which feels great in the hand even with the Cerakote finish. The sleeves are Hard Chrome to protect from oxidation and wear due to loading/unloading of the plates. The TESIRO Hercules Barbell is made from special steel alloy.
- Strength rating at 200,000 PSI
- Weight - 20 kg
- Grip - 29 mm
- Sleeve diameter - 50mm
- Length - 2.20 meters
- 1.5mm Volcano Aggressive Knurl
- Single International Powerlifting Knurl Marks
- 6 Bronze Bushings
- No Whip